FIRST COAT SEAL
Acrylic Undercoater Sealer
• Protects New Floors - Restores Old Floors
• Seals Porous Floors Such as Concrete
• Provides a Good Base for Floor Finish to Bond
• Salt and Detergent Resistant
• Protects Against Stains and Soiling
• Improves Performance of Top Coat
Application
1. STRIP floor of all old finish.
2. RINSE thoroughly and let dry.
3. APPLY one or two thin coats of First Coat Seal
4. APPLY the floor finish of your choice according to it's directions. - OPTIONAL
5. BURNISH with high speed machine (1000 rpm or more) for a higher gloss. - OPTIONAL
Recommendations
Floors that are very porous, such as concrete, may need more sealer than mentioned above.
This product is essential on floors that are very porous. Because it is not metal interlocked it provides a good base for non-buff or ultra high speed floor finishes.
Specifications
Type Acrylic polymer
Color of Liquid Milky white
Color of Film Colorless
Available Packaging: 1 Gal, 5 Gal, 55 Gal
Odor Pleasant
Storage 1 Year
Freeze Thaw 3 cycles
Buffability 1000-3000 rpm
Salt Resistance Excellent
Coverage 1500-2500 sq. ft./gal.
Flow & Recoat Excellent
Scrubbability Excellent
Gloss Excellent
Drying Time 20-40 minutes
Floor Solids 18-20%
Slip Resistance Meets or Exceeds ASTM Standard
|
